A-A-52015A
a. Title, number, and date of this item description.
b. If required, the specific issue of individual documents referenced (see 7.1)
c. Classification (size) required (see 2).
d. When treatment, painting, and paint color other than the manufacturer's standard is
required (see 3.5).
e. When CARC coating is required (see 3.5).
f. When lifting and tiedown attachments are required (see 3.6.1). g. If military lubricants are required (see 3.7).
g. When military packaging is required and specification of those requirements (see 6.1) or if additional markings are required (see 6.4).
h. Certification that the model offered meets all requirements of this commercial item description (see 5.1).
i. When this commercial item description is used for procurement, the commercial item certification clause must appear in the solicitation.
J. When commercial manuals with installation and operating instructions and parts list are required.
k. When a PIN number is required (see 7.3).
7.3 Part or identification number (PIN). The following part identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor (see 7.2). The PINs to be used for taglines acquired to this commercial item description are created as follows:
A 52015 - XX
Tagline size (see 2):
50 - For use with 1/2 yd3 capacity bucket
75 - For use with 3/4 yd3 capacity bucket
150 - For use with 1 yd3 and 1-1/2 yd3 capacity buckets
200 - For use with 2 yd3 capacity bucket
350 - For use with 2 yd3 up to 3-1/2 yd3 capacity buckets
CID number
CID designator
7.4 Key words.
Clamshell Bucket Constant Tension Load Stability
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business